Tigerwood by Jumping Spider Media
ToolPost.co.uk, the premier online resource for woodturning, woodcarving and other wood craft equipment and tools, is proud to present an exciting and unique product for pen-turners: Tigerwood. This timber-based product is sure to inject individuality into any pen or pencil making project thanks to the kaleidoscope of colours dyed into the Tigerwood timber. The strong laminate of beautifully dyed timber is impregnated with phenolic resin which ensures it does not suffer the chipping and delamination of similar yet inferior products on the market.
The beautiful Tigerwood timber product, newly discovered by ToolPost, is the perfect material for all sorts of project work: key fobs, perfume dispensers, and particularly pens and pencils. The phenolic resin makes it a clean turning timber: tough and durable; while the stunning array of colours dyed into the timber make for striking and eye-catching designs. Choose from a blue with yellow colourway or a yellow with blue; a red and grey or a red multi-coloured; a bright multi-coloured or a pastel mix colourway.
ToolPost stocks a wide range of both pen blanks and project blanks made from Tigerwood, perfect for the production of attractive and unique pens and pencils as well as a plethora of other items, from salt and pepper shakers, to key fobs and decorative eggs. The Tigerwood pen blanks are 19mm (3/4 inch) square and come in a choice of lengths so that you can personalise your pen project to your precise requirements. ToolPost's Tigerwood project blanks are 45mm (1.3/4 inch) square blocks, 80mm (3.1/4 inches) in length: substantial enough to turn into larger items such as perfume dispensers, or to give a chunky finish to smaller items such as key fobs.
The striking beauty of Tigerwood has to be seen to be fully appreciated. ToolPost.co.uk has clear colour images of the full colourway range, as well as some photographs of pen kits made in this amazing material. On the ToolPost website you will also find acrylic pen blanks and a whole host of kit for pen-turners. And of course ToolPost stock a wealth of tools and supplies for all sorts of wood craft projects, particularly wood turning tools such as woodturning lathes and woodturning chucks, as well as woodcarving tools, wood finishing products, tool grinding and sharpening equipment and a host of essential accessories such as respiratory equipment. View the entire range at http://www.toolpost.co.uk.
Editor's Note: The ToolPost is represented by the digital marketing specialists and SEO provider Jumping Spider Media. Please direct all press queries to Louise Byrne. Email: louise@jumpingspidermedia.co.uk or call: +44 (0)20 3070 1959 / +34 952 783 637.
About the Author
Editor's Note: The ToolPost is represented by the digital marketing specialists and SEO provider Jumping Spider Media. Please direct all press queries to Louise Byrne. Email: louise@jumpingspidermedia.co.uk or call: +44 (0)20 3070 1959 / +34 952 783 637.
Wood Turning Project: Pen Turning : Pen Kits for Wood Turning
Woodturning Kits
Related Posts
Basic Overview Of Lathe Machine by ankitamakwan
A lathe is well-defined as /lelo. Lathes are used for woodturning, metalworking, metal spinning, as well as tumbler functioning. The best-known design of lathe machine can be the tinker"s sweep. The majority suitably capable of Metalworking lathes can properly capable of to generate most hard substances to fabricate diverse machine parts. Plane exteriors as well as screw threads or helices can moreover be made. Lathes can be used to form ceramic objects; smithy etc. Gold smiths use decorative lathes to produce jewelry of astonishing complexity. The object can be secured in place by one or two axis. To supply accommodation altered stuff distance end to end, at least one of which can be twisted straight. Next bits and pieces can be produced on a lathe: candlestick holders, cue sticks, table legs, crockery, etc.
When an object is protected between the front stock moreover the back stock, it is well thought-out to be permanently fixed in midpoints. When an article is held at both nail trimmings, it is further steady. Consequently as working on the article more power can be applied to the object, right through equipments and the object still remains in position and it does not get release.
When an article is fixed to the spindle at the front stock ending, it is freely held at one end only. Here there are chances of releasing. When an object is fixed in this style, one can apply less force to a thing, through kits, Care requirements to be taken or else calamity can transpire.
When an objective is preset through a definite affiliation of revolution, worked, then fixed with a new bloc of mutiny it is identified as compound axial procedure. The outcome is that a diversity of cross segments of an entity varies at different bloc.
The smallest amounts of lathes are used for watchmakers. They are small and can be picked up in a hand. The object manufactured by a jeweler can be of gold or silver.
Minor metalworking lathes are bigger than jewelers" lathes. They can put back into working order on a work surface or counter. They cannot be used for repetitive production. They are for single use only. Only few lathes are for second use, nut still they have intricate facilities.
A lathe is well-defined as /lelo. Lathes are used for woodturning, metalworking, metal spinning, as well as tumbler functioning. The best-known design of lathe machine can be the tinker"s sweep. The majority suitably capable of Metalworking lathes can properly capable of to generate most hard substances to fabricate diverse machine parts. Plane exteriors as well as screw threads or helices can moreover be made. Lathes can be used to form ceramic objects; smithy etc. Gold smiths use decorative lathes to produce jewelry of astonishing complexity. The object can be secured in place by one or two axis. To supply accommodation altered stuff distance end to end, at least one of which can be twisted straight. Next bits and pieces can be produced on a lathe: candlestick holders, cue sticks, table legs, crockery, etc.
When an object is protected between the front stock moreover the back stock, it is well thought-out to be permanently fixed in midpoints. When an article is held at both nail trimmings, it is further steady. Consequently as working on the article more power can be applied to the object, right through equipments and the object still remains in position and it does not get release.
When an article is fixed to the spindle at the front stock ending, it is freely held at one end only. Here there are chances of releasing. When an object is fixed in this style, one can apply less force to a thing, through kits, Care requirements to be taken or else calamity can transpire.
When an objective is preset through a definite affiliation of revolution, worked, then fixed with a new bloc of mutiny it is identified as compound axial procedure. The outcome is that a diversity of cross segments of an entity varies at different bloc.
The smallest amounts of lathes are used for watchmakers. They are small and can be picked up in a hand. The object manufactured by a jeweler can be of gold or silver.
Minor metalworking lathes are bigger than jewelers" lathes. They can put back into working order on a work surface or counter. They cannot be used for repetitive production. They are for single use only. Only few lathes are for second use, nut still they have intricate facilities.
URL :
http://www.made-from-india.com/article/Lathe-Machines-Basic-Overview-842.html
made-from-india is a biggest b2b marketplace and b2b portal in india. Connecting global buyers to indian manufacturers, suppliers and exporters for the products which their needs.
More information at - http://www.made-from-india.com
Article Source: http://www.earticlesonline.com/Article/Basic-Overview-Of-Lathe-Machine/1016897
