 Metcut Series Z 31/64" 7FZ-0.484N Spade Drill Insert HSS T-15 TiCN coated US $71.20 
|
 1" Melin 5 Flute Cobalt Fine Pitch TiCN Coated Rougher End Mill #47688 Melin USA US $72.56
|
 5/16-24 3 FL GH3 Spiral Flute TiCN Coated High Speed Steel Plug Tap OSG US $3.99
|
 5/16" Carbide Endmill 2 Flute 2-1/2" Long 7/8" Flute length TICN coated US $19.00
|
 Square End Mill - 0.75 by 4.0 inch - 4 flutes - HSCO-PM - TiCN coated HSS US $54.99
|
 IMCO Lot of 8pc 1/4" Solid Carbide End Mills 4FL SE TiCN Coated Mill 204SO US $99.99
|
 3/8" Garr 220MC Solid Carbide TiCN Coated 2 Flute End Mill NEW (Lot#300) US $14.99
|
 THREAD MILL SOLID CARBIDE 1/4-28 EMUGE TICN COATED US $100.00
|
 New Niagara Ticn Coated Cobalt 5 Flute Roughing Endmill US $85.00
|
 2.13mm OSG VPH-GDS STUB DRILL HSS-CO TICN COATED (5 PC) 8608213 NEW $71.85 /PK US $32.99
|
 MICRO 100 15/64" 3 FLUTE CARBIDE END MILL TiCN Coated USA NEW GEM-234-3T US $11.95
|
 90 PCS INGERSOLL PCXF 13-01 GRADE J05 TiCN COATED CARBIDE INSERTS US $99.00
|
 14mm OSG TWIST DRILL SILVER & DEMING CPM TiCN COATED(1 PC) DR7182 US $37.62
|
 Carbide Endmill .6975 Dia 2 FL TICN Coated US $59.00
|
 KEO 3/64" X 9/64" 3 FLUTE 1/4" Shank CARBIDE END MILL 87024-TiCN Coated USA NEW US $17.22
|
 M16 x 1.5 (JIS II) 4FLUTE OSG BOTTOM TAP HSS TICN COATED (1PC) 1915008 NEW US $14.99
|
 8-32 3 FL GH3 EM SS Spiral Flute TiCN Coated High Speed Steel Plug Tap Widia US $1.95
|
 KEO 7/32" X 5/8" 3 FLUTE 1/4" Shank CARBIDE END MILL 87032-TiCN Coated USA NEW US $19.31
|
 KEO 7/32" X 3/8" 3 FLUTE CARBIDE STUB END MILL 87010-TICN Coated USA NEW US $14.25
|
 KEO 1/32" 3 FLUTE LONG REACH CARBIDE END MILL 87012-TiCN Coated USA NEW US $22.25
|
 KEO 3/64" 3 FLUTE LONG REACH CARBIDE END MILL 87013-TiCN Coated USA NEW US $22.25
|
 EMUGE M8 x 1.25 3FL TAP - TICN COATED NEW $74.80 US $37.40
|
 MAF 16437500C - 3/8 2F CARBIDE STUB ENDMILL - TiCN COATED US $24.00
|
 MAF 16450000C - 1/2 2F CARBIDE STUB ENDMILL - TiCN COATED US $25.00
|
 MAF 12137500C - 3/8 2F CARBIDE ENDMILL - TiCN COATED US $20.00
|
 2 Pcs Hertel 1/4" Roughing End Mills 4FL Cobalt TiCN Coated US $25.00
|
 KEO 7/64" X 3/16" 3 FLUTE LONG REACH CARBIDE END MILL 87017-TiCN Coated USA NEW US $18.75
|
 KEO 3/32" X 3/16" 3 FLUTE LONG REACH CARBIDE END MILL 87016-TiCN Coated USA NEW US $19.65
|
 3/64" (.0469") OSG EXOMINI 2 FLUTE CARBIDE ENDMILL, TICN COATED US $9.75
|
 Cleveland Twist Drill C39828 6 FL TiCN Coated Centercutting Single End Mill US $89.99
|
 Carbide End Mill 3/4" x 3" x 7/8" LOC 5F GARR 255MC TiCN coated high performance US $19.99
|
 3 New 9/16-12 HiPro NC 2B OSG PLUG TiCN COATED ROLL FORM TAPS FORMING USA US $22.45
|
 OSG HSCO TiCN COATED FOUR FLUTE 25mm END MILL V-EMS US $47.41
|
 OSG HSCO TiCN COATED FOUR FLUTE 12mm END MILL V-EMS US $15.80
|
 13/32 3 FLT TICN COATED CARBIDE ENDMILL (W176-2) US $20.50
|
 7/16 3 FLT TICN COATED CARBIDE ENDMILL (W161-1) US $20.50
|
 12 NEW GREENFIELD 19229 5353TC M12 X 1.75 D6 4FL TICN COATED HAND TAP LOT US $14.99
|
 Niagara Cutter Six Flute Single End Mill 1-1/2" TiCN Coated 1-1/4" Shank #69218 US $99.99
|
 Niagara 3/8" x 1/2" M42-8% Cobalt Fine-Pitch Roughing CNC End Mill-TiCN Coated US $27.25
|
 Niagara 3/8" M42-8% Cobalt Fine-Pitch Roughing CNC End Mill-TiCN Coated US $29.50
|
 Niagara 1/2" x 5/8" M42-8% Cobalt Fine-Pitch Roughing CNC End Mill-TiCN Coated US $36.50
|
 Niagara 1/2" M42-8% Cobalt Fine-Pitch Roughing CNC End Mill-TiCN Coated US $38.50
|
 Niagara 5/8" M42-8% Cobalt Fine-Pitch Roughing CNC End Mill-TiCN Coated US $46.75
|
 Niagara 3/4" M42-8% Cobalt Fine-Pitch Roughing CNC End Mill-TiCN Coated US $53.50
|
 Niagara 3/4" x 2" M42-8% Cobalt Fine-Pitch Roughing CNC End Mill-TiCN Coated US $63.95
|
 Niagara 3/4" x 3" M42-8% Cobalt Fine-Pitch Roughing CNC End Mill-TiCN Coated US $69.95
|
 Niagara 1" M42-8% Cobalt Fine-Pitch Roughing CNC End Mill-TiCN Coated US $80.50
|
 Niagara 1" x 3" M42-8% Cobalt Fine-Pitch Roughing CNC End Mill-TiCN Coated US $102.95
|
 Niagara 1" x 4" M42-8% Cobalt Fine-Pitch Roughing CNC End Mill-TiCN Coated US $108.95
|
 Niagara 1-1/4" x 3" M42-8% Cobalt Fine-Pitch Roughing CNC End Mill-TiCN Coated US $140.50
|
 6 Pcs. Niagara 3/8" M42-8% Cobalt Fine-Pitch Roughing CNC End Mills-TiCN Coated US $172.75
|
 6 Pcs. Niagara 1/2" M42-8% Cobalt Fine-Pitch Roughing CNC End Mills-TiCN Coated US $226.75
|
 6 Pcs. Niagara 5/8" M42-8% Cobalt Fine-Pitch Roughing CNC End Mills-TiCN Coated US $274.95
|
 6 Pcs. Niagara 3/4" M42-8% Cobalt Fine-Pitch Roughing CNC End Mills-TiCN Coated US $315.25
|
 6 Pcs. Niagara 1" M42-8% Cobalt Fine-Pitch Roughing CNC End Mills-TiCN Coated US $474.25
|
 10 Pcs. Niagara 1" M42-8% Cobalt Fine-Pitch Roughing CNC End Mills-TiCN Coated US $776.95
|
 3/64" 2 Flute Carbide Endmill Flat Bottom TiCN coated US $4.25
|
 NEW Greenfield 10mm Cobalt Roughing End Mill TiCN Coated US $31.20
|
 NEW OSG 25/64" Ex-Gold Coolant Jobber Drill HSS-Co .3906" TiCN Coated US $55.20
|
 1/2" Coarse Tooth 4 Flute End Mill TiCN Coated US $31.00
|
 OSG M16x1.5 D7 4SP/FL 1.5P SEMI BOTTOM TAP VC10 TiCN COATED NEW! (1pc) 06054TP US $29.99
|
 1 X 1 X 1"LOC S/C ROUGHING EM TICN COATED (AA1618-1) US $55.00
|
 m11 x 1.5 HSSE Tap TICN Coated US $6.25
|
 Vega XHP-MB M8 x 1.25 TiCN Coated Bottoming Tap US $10.00
|
 CARBIDE END MILL 5/16 DIA WITH RADIUS 3 FL TICN COATED US $12.00
|
 MAF 11104680C - 3/64" DIAMETER 4 FLUTE CARBIDE ENDMILL TiCN COATED US $15.00
|
 MAF 11106250C - 1/16" DIAMETER 4 FLUTE CARBIDE ENDMILL TiCN COATED US $18.00
|
 AMEC acme #3 T-A 1-15/32" HSS TiCN Coated spade drill 133N-0115 US $29.18
|
 WIDIA RUBIG 12mm Dia roughing EM 3 FLT 49G912005CT TICN COATED FOR ALUMINIUM US $65.00
|
 9 pcs GARR TOOLS 33 solid carbide jobber drills #33 TICN coated US $29.99
|
 1/2" 3 Flute TiCN Coated Cobalt CP 35° Helix Roughing End Mills F/Aluminum Melin US $32.99
|
 1 1/4 6FL Cobalt End Mill TICN Coated Cleveland#C32042 {1}PC. US $119.00
|
 NIAGARA 1-1/2" 1.50 6 FLUTE COBALT ROUGHING ROUGHER END MILL TiCN COATED USA NEW US $124.00
|
 3/4" AMEC 1C21N-0024 SPADE DRILL INSERT C2 CARBIDE TiCN COATED SERIES #1 TA T-A US $13.00
|
 .4270" AMEC 15YN-.4270 SPADE DRILL INSERT SUPER COBALT TiCN COATED #Y SERIES T-A US $12.00
|
 OSG M10 x 1.5 H4 4-FLUTE TAPS VC-10 (POWDERED METAL) TICN COATED NEW- (10 PCS) US $39.99
|
Ticn Coated
50mm Keeper Bars
Here are a list of other products on Woodturning Tools, come check these out:
